Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Prestacycle Presta Head Rubber Gasket
$3.50
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Problem Solvers Air-Bob O-rings for brass button under lever
$4.00
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.
Specialized 2018 Air Tool Mounting Bracket
$5.00
Spare mounting bracket for 2018 Air Tool frame pumps.
Eleven81 Presta Valve Extender
$9.99
Eleven81's Presta Valve Extender is perfect for deep-section rims. It screws onto your standard length (removable) Presta valve to make it long enough to protrude through the rim so you can inflate and deflate your tire with ease. The extender also has wrench flats for secure tightening.
Problem Solvers Air-Bob Replacement Inflation Lever
$9.99
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
Specialized Replacement Switch Hitter II Floor Pump Head
$9.99
- Replaces well-used head and fittings and prolongs the life of your trusty floor pump - For 2010 floor pumps
Specialized Replacement Hose - Sport/Comp/HP
$10.00
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
Lezyne Valve Extender
$14.99
Lezyne's Valve Extenders are necessary for deep-section rims. They allow you to inflate and deflate tires easily, and feature wrench flats for simple tightening.
Planet Bike Dial Gauge Tire Gauge
$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! • VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) • STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items • FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. • The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) • The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) • Glass Reinforced Nylon • Chassis weight: 30 grams Includes: • Center Plate • Multi Holder • CO2 Holder • 2 AIR STRIKE CO2 Cartridges • Hardware Popular Clincher Setups (accessory items sold separately) • Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. • 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) • Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. • Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
Specialized Air Tool Pro Pump Handle
$50.00
Replacement for Air Tool Pro Pump handle.
Park Tool Shop Inflator
$140.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
Park Tool Shop Inflator
$140.95
Specially built for inflating all bicycle tires and tubes, on all the different sizes and types of bike wheels, Park's Shop Inflator is a great shop-grade upgrade for your air compressor setup. For quick and easy inflating it has an ergonomic body for a sure grip, a 2-finger handle to control the air, and best of all, a small rotating head that's easy to fit between spokes, and that works on Schrader and Presta valves. Plus, you get an oversize, reinforced pressure gauge that reads from 0–220 psi (0–15 bars) and a pressure-release button for getting the psi exactly right. This fine inflator is built durably of quality materials throughout for everyday use in your shop and is rebuildable! It comes with a coupler plug compatible with most air hose quick-connect couplers. And it will accept any 1/4-inch National Pipe Thread fitting if you don't use a coupler.
Page 1 of 1