Other

Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$44.45
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.

$7.95 - $14.95
The M5 bolt is one of the most common types of bolt found on bicycles. This size is used for water bottle mounts, cable anchor bolts, fender/rack eyelets, shifter mounts and more. Problem Solvers offers up sleek black bolts for when silver just won't cut it. And, these aluminum M5 bolts come with captured washers, too.

$29.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever

$36.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame.
- Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

$15.00
- Durable custom-molded plastic guard
- Co-molded rubber exterior to help quiet chain-slap noise
- Easy installation and removal

$95.00
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 4 N/mm (23 lbs./in).
- Fits Ohlins TTX shock absorber for Stumpjumper FSR only.
- Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs.
- Precise spring rates are broken down to 4 N/mm (23 lbs./in).

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm

$25.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$109.00
Problem Solvers' Abnormal 46 PressFit 30 Adapter allows you to combine normally incompatible cranks and frames. The A46 modifies 46mm BB shells (the standard for PressFit 30 BB) to accept 24mm and GXP spindles. Use your old cranks with new frames!
Technical Details
• CR0094 accepts 24mm crank spindles (Hollowtech II, RaceFace X-Type)
• CR0095 accepts GXP-type cranks from Truvativ & SRAM
• Enduro cartridge bearings and seals

$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort.
Performance
The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments.
Fit Data
- Armrest Offset: -85mm to -17.5mm in 7.5mm steps
- Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm)
- Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit)
- There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily.
Origin
- The Supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made.
- The Ergo armrest is an integral part of the overall adjustability scheme. The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders.
Extensions
- Extension Shape: The 50c extensions offer a 50 deg ski bend shape with a 7.5mm (per side) lateral shift. This allows a neutral wrist angle with the capability to fine tune the grip width. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing.
- Bracket: Supersonic
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo / 10mm Pads
- Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm)
- Armrest Offset: -85mm to -17.5mm in 7.5mm steps
- Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)

$28.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$15.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$20.00
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$24.95
These clamp sets can be used on any of the Thomson Seatpost line (Elite, Masterpiece, & Droppers)

$24.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

$16.00
- Aluminum collars feature angled slots.
- S-Works 32.6mm standard collar (14mm tall) fits all Specialized road frames with an aluminum outer seat tube sleeve
- S-Works 31.8mm standard collar (14mm tall) fits all Specialized road frames with a 31.8mm outer seat tube diameter

$4.50
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm

$35.00
Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails.
- 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design
- New design clamp for better clamping and non-slipping of the saddle

$60.00
- Provides 45mm of incremental height adjustment for the extension riser stack on the Specialized Carbon Aerobar or Specialized Hydroformed Alloy Aerobar.
- Includes two 5mm spacers, two 10mm spacers, four 20mm spacers, and all necessary hardware.

$169.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained.
Performance
The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle.
Fit Data
- Armrest Offset: -85mm to 17.5mm in 7.5mm steps
- Armrest Width: 131mm to 298mm in 18.5mm steps
- Armrest Stack: 40mm
Origin
As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort.
- Bracket: L2 Flip-Up
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo Armrest
- Armrest Stack: 40mm
- Reach: -85mm to 17.5mm in 7.5mm steps
- Extension Adjustment: 150mm (center of basebar - end)
- Armrest Width: 155mm - 203mm
- Weight: 592g
Page 1 of 3
Next page